Occupational Safety and Health Act CAP 236A

Section 65 of Occupational Safety and Health Act CAP 236A: Cranes and other lifting machines

(1) All parts and working gear whether fixed or movable, including the anchoring and fixing appliances, of every lifting machine shall be of good construction, sound material, adequate strength and free from patent defect, and shall be properly maintained.
(2) All parts and gear referred to in subsection (1) shall be thoroughly examined, at least once in every period of twelve months, or after any modifications or extensive repairs or within a shorter period, by a person approved for the purposes of this section by the Director by certificate in writing.
(3) No lifting machine shall be used in any workplace, for the first time in that workplace, unless it has been tested and all the parts and working gear of the machine specified in subsection (1) have been thoroughly examined by a person approved by the Director for the purposes of this section and a certificate of the test and examination, specifying the safe working load or loads of the machine and signed by the person who carried out the test and examination, has been obtained and is kept available for inspection:
Provided that the provisions of this subsection shall not apply with respect to any lifting machine in respect of which there has been obtained, and is kept available for inspection, a certificate of test and thorough examination issued by the manufacturer of the machine.
(4) All rails on which a travelling crane moves and every track on which the carriage of a transporter or runway moves shall be of proper size and adequate strength, and have an even running surface; and any such rails or track shall be properly laid, adequately supported or suspended and properly maintained.
(5) There shall be plainly marked on every lifting machine the safe working load or loads thereof, except that in the case of a jib crane so constructed that the safe working load may be varied by the raising or lowering of the jib there shall be attached thereto either an automatic indicator of safe working loads or a table indicating the safe working loads at corresponding inclinations of the jib or corresponding radii of the load.
(6) No lifting machine shall, except for the purpose of a test, be loaded beyond the safe working load as marked or indicated under subsection (5).
(7) If any person is employed or is working on or near the wheel-track of an overhead travelling crane in any place where he would be liable to be struck by the crane, effective measures shall be taken to ensure that the crane does not approach within six metres of that place.
(8) A lifting machine shall not be operated except by a person who is trained and possesses a certificate in writing to that effect from a recognised institution, to operate that machine, except that it shall be permissible for such machine to be operated by a person who is under the direct supervision of a qualified person for the purposes of training, and no person under the apparent age of eighteen years of age shall be employed to operate any lifting machine driven by mechanical power or to give signals to the operator of any such machine.
(9) In this section, “lifting machine” includes a crane, crab, winch, teagle, pulley block, gin wheel, transporter or runway used for raising or lowering of goods.

Check the current authoritative text and amendment history before relying on this provision.

View all provisions of Occupational Safety and Health Act CAP 236A →

Continue through this Act

View all →

Section 67 — Steam boilers

(1) Every steam boiler and all its fittings and attachments shall be of good construction, sound material, adequate strength and free from patent defect, and shall be properly maintained. (2) Every st…

Section 69 — Air receivers

(1) Every air receiver shall— (a) have marked upon it, so as to be plainly visible, the safe working pressure; (b) in the case of a receiver connected with an air compressing plant either be so constr…

Section 71 — Refrigeration plants

(1) Every refrigeration plant capable of being entered by an employee shall— (a) have all control valves situated outside the cold storage room; and (b) have all doors of the cold storage room capable…

KEEP THE USEFUL PART

Save to My Research

Create a new folder