Occupational Safety and Health Act CAP 236A

Section 80 of Occupational Safety and Health Act CAP 236A: Precautions with respect to explosive or inflammable dust or gas

(1) Where, in connection with any grinding, sieving or other process giving rise to dust, there may escape into any workroom, dust of such a character and to such an extent as to be liable to explode on ignition, all practicable steps shall be taken to prevent such an explosion by enclosure of the plant used in the process, and by removal or prevention of accumulation of the dust, and by exclusion or effective enclosure of possible sources of ignition.
(2) Where there is present in any plant used in any process referred to in subsection (1), dust of such a character and to such an extent as to be liable to explode on ignition, then, unless the plant is so constructed as to withstand the pressure likely to be produced by any such explosion, all practicable steps shall be taken to restrict the spread and effects of such an explosion by the provision, in connexion with the plant, of chokes, baffles and vents, or other equally effective appliances.
(3) Where any part of a plant contains any explosive or highly flammable liquid, gas or vapour under pressure greater than atmospheric pressure, that part shall not be opened, except in accordance with the following provisions—
(a) before the fastening of any joint of any pipe connected with the part of the plant or the fastening of the cover of any opening into the part is loosened, any flow of the liquid, gas or vapour into the part or into any such pipe shall be effectively stopped by a stop-valve or otherwise; and
(b) before any such fastening is removed, all practicable steps shall be taken to reduce the pressure of the liquid, gas or vapour in the pipe or part of the plant to atmospheric pressure; and if any such fastening has been loosened or removed, no explosive or flammable liquid, gas or vapour shall be allowed to enter the pipe or part of the plant until the fastening has been secured or, as the case may be, securely replaced.
(4) No plant, tank or vessel which contains or has contained any explosive or inflammable substance shall be subjected to any welding, brazing or soldering operation or to any cutting operation which involves the application of heat, until all practicable steps have been taken to remove the substance
and any fumes arising there from, or to render them non-explosive or non-inflammable; and, if any plant, tank or vessel has been subjected to any such operation, no explosive or inflammable substance shall be allowed to enter the plant, tank or vessel until the metal has cooled sufficiently to prevent any risk of igniting the substance.
(5) The Director may, by certificate in writing and subject to any condition specified in the certificate, exempt any part of a plant from compliance with any of the requirements of subsection (3) in any case where he is satisfied that compliance with the requirement is unnecessary or impracticable.

Check the current authoritative text and amendment history before relying on this provision.

View all provisions of Occupational Safety and Health Act CAP 236A →

Continue through this Act

View all →

Section 81 — Safety provisions in case of fire

(1) In every workplace or workroom there shall be— (a) provided and maintained, and conspicuously displayed and free from any obstruction so as to be readily accessible, means for extinguishing fire,…

Section 82 — Evacuation procedures

(1) Every occupier of a workplace shall design evacuation procedures to be used during any emergency and have the procedures tested at regular intervals. (2) Every occupier shall take immediate steps…

Section 84 — Material safety data sheets

(1) Every manufacturer, importer, supplier or distributor of chemicals shall make available to employers, material safety data sheets for chemicals and other hazardous substances, containing detailed…

Section 85 — Labelling and marking

(1) Every supplier of hazardous substances, whether as manufacturer, importer or distributor of hazardous substances shall ensure that containers filled with hazardous substances, are— (a) plainly pai…

KEEP THE USEFUL PART

Save to My Research

Create a new folder